Automatizari si aparatura analitica de ultimă generaţie: alege calitatea SMART

Transforma telefonul intr-un indicator inteligent de pH: Sensorex

Pompe industriale. Solutii profesionale pentru orice aplicatie.

Echipamente industriale pentru transmisii de date si sisteme SCADA

loading
menu height
detaliuStart Debitmetre
foto Debitmetre cu ultrasunete
  zoom  mareste imaginea
Aveţi intrebări?  0721 793646

Va stăm cu plăcere la dispozitie
de luni până vineri între orele 8:00-19:00
Debitmetre cu ultrasunete

SPECIFICATIONS

MAIN UNIT
Accuracy: Better than ±1%
Repeatability : Better than 0.2%
Principle : Transit-time measuring principle
Measurement period : 500ms
Display : LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc.
Analogue output: 4-20mA or 0-20mA current output.
Impedance 0∼1kohm. Accuracy 0.1%.
OCT output: Frequency signal (1~9999HZ)
Relay output: over 20 source signal (no signal, reverse flow etc.)
RS485 serial port
Input Three analogue input
Three-wire PT100 resistor input (optional)
Other functions :
Automatically record the totaliser data of the last 64 days / 64 months / 5 years;
The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation
The instrument working status of the last 64 days

PIPE

Material : Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed
Size 15-6000mm
Straight pipe : In the upstream it must be beyond 10D, in the downstream it must be beyond 5D, in the upstream the length must be beyond 30D from section the access of the pump. (D stands for pipe diameter)

LIQUID
Type : Water, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform
Liquid Temperature : Standard: -30˚C - 90˚C ,High-temperature:-30˚C - 160˚C
Turbidity : Less than 10000ppm, with a little bubble
Flow Direction : Bi-directional measuring, net flow/heat measuring

ENVIRONMENT
Temperature Main Unit: -30˚C - 80˚C
Temperature Transducer: -40 ℃ -110 ℃
Temperature transducer: select enquiry
Humidity Main Unit: 85% RH
Humidity Transducer: water-immersible, water depth less than 3m

CABLE
Twisted Pair Line, standard length of 20m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement.
RS-485 interface, transmission distance up to 1000m

Power Supply : AC220V or DC24V

Power consumption : Less than 1.5W

Protocols : MODBUS, M-BUS, Fuji extended protocol and other factory protocol







Contactati-ne si vom găsi solutia optimă pentru dumneavoastră !
Nume
Telefon
Email
Orasul
Continut mesaj
Introduceti codul de verificare code 
* rubrica obligatorie
 Am citit termeni si conditii si sunt deacord. Imi dau acordul expres si neechivoc ca datele obtinute in urma prezentuli formular sa fie procesate si folosite de catre SC SMART DIGITAL SIGNAL AG SRL, exclusiv pentru actiuni de oferte, marketing, pentru a-mi trimite informatii despre produsele si serviciile pe care le furnizeaza.